AI generated- 4 pipes
- 8 leakage wires
- 4 × 8000 m
- loop
- IP67
- protection rating
- Cat-M1 / NB-IoT
- LTE modem
Moisture monitoring module for four pipes
The miniPG not only finds faults on the connected monitored sections; connected to the monitoring system it also allows simpler analyses and troubleshooting directly from the office.
The module has a built-in LTE Cat-M1 or NB-IoT modem. A special measuring method ensures that the length of the loop does not affect the readings: the same amount of moisture always gives the same result, no matter how far from the module the leak occurs. Alarms are sent by SMS and readings go to the monitoring system. The module is configured and updated remotely. Readings are available as often as every hour.
Building monitoring with this module is the most economical way to build an alarm system. You simply buy the modules you need, one or hundreds.
| Insulation resistance | 0–10 000 kΩ |
|---|---|
| Loop resistance | 0–100 Ω |
| Galvanic voltage | 0–1000 mV @ 1 MΩ |
| Section length | 4 × 4000 m pipe / 4 × 8000 m loop |
| Communication | LTE Cat-M1, NB-IoT, GSM/GPRS and SMS |
|---|---|
| Power supply | Mains or battery pack |
| Voltage | 10–30 V (14,4 V) |
| Current | 15 mA (max 500 mA) |
| Alarm input | Open / close |
|---|---|
| Alarm output | 48 V / 200 mA |
| LED indication | Yes |
| Protection rating | IP67 |
| Dimensions (W × H × D) | 175 × 100 × 100 mm |
| Battery pack (W × H × D) | 160 × 120 × 120 mm |
Ask us or request a quote
Tell us about your network, and we will prepare a quote for the miniPG.