AI generated- 2 pipes
- or 2 loops
- 2 × 8000 m
- loop
- IP67
- protection rating
- GPRS
- built-in modem
Powerful and economical
The microPG is a compact monitoring module with a built-in GPRS modem. A unique way of measuring the wires in the loop ensures that the length does not influence the readings. This makes alarms and trend curves easier to analyse: the module gives the same data regardless of where it is, and the same amount of water gives the same result.
The module is extremely sensitive and detects problems long before they can be located with TDR. It suits dense networks with many branches, where locating a fault without handheld measurements from several points is difficult. On new pipes the microPG easily detects warranty issues.
The microPG sends SMS or delivers data to the monitoring system over GPRS. The module is configured and updated remotely. Readings are available as often as every hour, and long-term monitoring shows how moisture develops in the insulation.
| Insulation resistance | 0–10 000 kΩ |
|---|---|
| Loop resistance | 0–100 Ω |
| Galvanic voltage | 0–1000 mV @ 1 MΩ |
| Section length | 2 × 4000 m pipe / 2 × 8000 m loop |
| Communication | GSM, GPRS and SMS |
|---|---|
| Power supply | Mains or battery pack |
| Voltage | 10–30 V (14,4 V) |
| Current | 15 mA (max 500 mA) |
| Digital inputs (2) | Open / close |
|---|---|
| Alarm output | 48 V / 200 mA |
| LED indication | Yes |
| Protection rating | IP67 |
Ask us or request a quote
Tell us about your network, and we will prepare a quote for the microPG.